Audi S6 Vertical Doors

<< FIRST < PREV ...   NEXT > LAST >>
  • Audi S6 Vertical Doors
  • SELECT CATEGORY
  • Vertical Doors PRODUCT LINE(S)
  • SELECT BRAND
  • Audi S6 Vertical Doors
SORT:
VIEW:
<< FIRST < PREV ...   NEXT > LAST >>
Vertical Doors

Vertical Doors

About Vertical Doors

Vertical Doors, Inc., kits are proudly made and patented in the United States and are bolt-on kits made specifically for your particular vehicle. We only manufacture the best kits, best quality, best customer service, strongest kits, and most affordable for the quality. Our line-up includes all the major vehicle manufactures.

This system is everything you need for a successful, reliable and cost effective conversion in a minimum amount of time.

Not only are our kit easy to install but they are also easy to operate, basically open your door like normal until it stops, at a predetermined position and then just raised your door up until it stops. You also have the option of not raising the door since unlike most Lambo Doors, Scissor Doors, Wing Doors, Butterfly Doors, Lamborghini Doors, etc, imitators; our Vertical Doors, Inc., kits will allow you to get in and out without having to raise your doors.

This Authentic Vertical Doors, Inc. kit will enable you to easily modify your vehicle and attain the look you desire!

If you like the iconoclastic look of the LAMBROGHINI and want to capture some of its unique look by emulating the vertical door identified with this luxury car then you have come to the right spot because VERTICAL DOORS, INC. and LMPEFORMANCE can help you do that with the VERTICAL DOOR kit. The very first vertical door made its appearance on the Alfa Romeo CARABO concept car and not on the LAMBROGHINI at all and was the result of the car designer’s desire to not only enhance the design of the car but also to improve the car’s exceedingly poor rear visibility by allowing the driver to lift the door and lean out in order to see behind. The first actual production car to feature these doors was, in fact, the LAMBROGHINI whose wide chassis design created problems similar to those of the CARABO concept car. The doors became a trademark of the LAMBROGHINI and thus the doors are quite often called by their colloquial name of “LAMBO DOORS”. Now you know a little history behind the classy door style and it is time to make a decision regarding the kit it will take to accomplish your goal and since today quite a few aftermarket companies specialize in manufacturing conversion kits that enable you to get that LAMBO DOOR look and performance we want to give you the information you need to decide on VERTICAL DOORS, INC. First, of course, is the fact that they have United States patenting on those extremely important hinges and the hinges are manufactured under United States guidelines, and then there is the fact that VERTICAL DOORS, INC uses stronger steel, heat treats all pivot and strike points, uses primo quality German made shocks, provides detailed instructions for most cars, and has earned an outstanding reputation after being in business for over ten years. Just remember that you are not replacing your car’s factory door but just the front door hinges and that in order to complete the installation you will need to remove your front fenders and in some instances the car’s front bumper or fascia and quite often minor trimming to your front bumper is necessary in order to make a clearance for your new hinges as well as modifications being needed in the wiring harness. You will find VERTICAL DOOR kits for every make of car from an Acura to a Volkswagen and a potpourri of makes in between on the LMPERFORMANCE web site at a competitive price and with free shipping.

Newest Vertical Doors Car Parts for Your Audi S6

Audi

These are some of the items you can find at LMPerformance for your Audi

Progress through Technology- is the company ethos and is the core belief that drives the development of every Audi vehicle and if you are the proud owner of an Audi you deserve the best for your vehicle and Late Model Performance wants to help you get what you deserve.

LMPerformance is proud to offer high quality exhaust systems for your Audi by B&B (Billy Boat) Exhausts. B&B Systems feature an exotic sound that is never too loud. B&B Exhausts are made in the USA and are constructed of high Quality 304 Stainless Steel.

The Sport Lowering Springs from B & G Suspension for your Audi 200, 4000, 5000, 80. 90, A3, A4, A5, A6, A8, S4, S5, S6 and TT can give your Audi that race car look but as an added incentive to make the change consider the fact that they will promote better handling and road holding because you are reducing the distance between your car and the floor and as a consequence are altering the air flow under the car. The B&G springs are manufactured to the high standards you want in lowering springs so that they are long lasting and corrosion resistant.

Washable and reusable filters from the inimitable K & N can be beneficial in increasing horsepower in your Audi but consider that with the addition of an air intake system you can eliminate air restrictions built into your factory system for even greater results. The 57 series air intake systems for your A3, Quattro and TT will produce a marked improvement in your engine’s performance and you won’t be disappointed in your decision to make this change. The K&N Performance Kit for your A3, A4, Quattro and TT; the International Kit for the A3, A4, A6, RS4, TT, A6, A3 all have an oversized air filter and are attached to rotationally molded tubes of High Density Polyethylene g for precise shaping so that there is a resultant reduction in turbulence and freer path for air flow into your Audi engine.

Replacing your clutch either out of necessity, improvement or just racing fun will be worth the investment with an outstanding clutch from SPEC. The SPEC products are available as full Clutch Kits, Clutch Disks and Clutch Pressure Plates for your Audi and because SPEC knows not all drivers are alike they offer you a multiplicity of choices for your new clutch so that you can match your clutch to your driving needs rather than matching your driving to your clutch’s needs. Also for the discriminating buyer we have the SPEC billet flywheels, manufactured to the highest standards with a .001 machine tolerance for a perfect seating surface on your Audi clutch for those who need a lighter weight flywheel for their driving demands.

For even more improved performance replace your OEM shocks with the premier high performance shocks from KONI. The KONI shocks and shock and spring kits and are obtainable in the yellow sport that can be used with spring kits, the orange street, and the FSD Gold that adjust automatically to road conditions. KONI Coil Over Kits for your Audi TT, A3 and A4 are an enhancement to your Audi because they produce better road holding and a captivating look and the give you the ability to individualize your ride height. KONI is known worldwide for the manufacture of performance and adjustable shocks that are of superlative quality.

Installing the EIBACH Sway Bar Kit to your Audi A3 will fine-tune the performance handling of your car, reduce body roll and result in improved corner gripping and since it is manufactured by the prestigious EIBACH company you get a million-mile warranty because they believe in their product. Or, better yet, consider the Sport-Plus for your Audi A3 that includes the EIBACH SPORTLINE Springs and Anti-Roll Kit Sway Bars so that you reduce squat during acceleration, body roll and excessive nose-dive. Consider Coil-Over Kits for your A3, A4, S4 and TT to get your Audi looking and performing its best or install lowering kits on your A3, A4, A5, A6, S4, S5 and TT to lower your car's center of gravity resulting in high performance and an extremely low and comfortable ride- all from the prestigious manufacturer EIBACH.

Whether out of necessity because of repair, for improvement in appearance, or for aerodynamics in racing, choosing body parts can be overwhelming.

but with extraordinary manufacturers like Seibon and Duraflex the job is easy. Seibon Carbon components are made of high-quality carbon fiber and whether it be trunk panels for your A4 and A8, Hoods for your A3, A4, A5, A8 or TT, or Rear Wings for your TT you will get the best with Seibon because every part has an exceptional carbon/resin ration for extra strength and comes with a glossy clear coat. The eminent manufacturer Duraflex can indulge your Audi with Body Kits, Bumpers, Rear Lips, Front Spoilers, Door Caps, Fender Flares, Grilles, Hoods, Rear Wings, Side Scoops, Side Skirts and Trunk Panels fabricated from its extraordinary composite of fiberglass, plastic and resins that present you with a product that is eminently more durable at an affordable price and ready for a paint job because they come primed.

^

LM Performance Shopper Approved Reviews