Audi Injen

<< FIRST < PREV ...   NEXT > LAST >>
  • Audi Injen
  • SELECT CATEGORY
  • Injen PRODUCT LINE(S)
  • SELECT BRAND
  • Audi Injen
SORT:
VIEW:
<< FIRST < PREV ...   NEXT > LAST >>
Injen

Injen

About Injen

Injen Technology is the creator of The World's First Tuned Cold Air Intake System.

For over a decade Injen Technology Co. Ltd and our sister company has played a major roll in the design and development of air intake systems. Injen Technology is based out of California in the same city and just a few miles away from the famous Pomona Winter Nationals Top Fuel Raceway.Injen Technology's history is a classic success story of a small manufacturing company turned industry leader of aftermarket performance products.

What most people do not know is that Injen's sister company, RD Metal Works established in 1981, was actually designing and manufacturing air intake kits for leading air filter and intake manufacturers since the mid 1990's. Absorbing the experience, design capabilities and quality standards of RD Metal Works, Injen Technology was formed. In 1998, we embarked on a never-ending quest to brand our own name and set new standards of quality and performance while constantly striving to improve our own engineering capabilities. Bringing together all phases of manufacturing under one roof proved to be the equation for unrivaled success.

Injen

If you are considering an aftermarket improved air intake system then the team at LMPERFORMANCE knows you are passionate about your car’s performance whether you are using it on the street or on the tract. We also know that you want the best performing and durable air intake system for your automobile. Taking these things into consideration we encourage to take a look at the products from INJEN TECHNOLOGY CO., LTD, one of the leaders in the performance aftermarket industry.

When a small manufacturing company works hard and strives to become one of the best they do not always succeed but that is not the case with INJEN TECHNOLOGY CO., LTD because they did succeed in becoming one of the industry leaders in the development and manufacturing of aftermarket performance products. Having had the opportunity to share in the accomplishments of their sister company RD METAL WORKS has afforded them incomparable knowledge relative to the design and manufacturing of air intake kits because RD METAL WORKS has been doing just that since the mid 1990’s. Utilizing the knowledge and maintaining the quality standards of their sister company INJEN TECHNOLOGY was established in 1998. Having its headquarters in California where the Pomona Winter Nationals Top Fuel Raceway is located was an added boon to the company.

INJEN was determined to make a name for itself in the performance aftermarket industry by designing and manufacturing primo air intake systems allowing them to become one of the leaders in the industry. They were able to accomplish this by integrating all aspects of manufacturing in one facility affording them the opportunity to monitor and evaluate every part of the process and their company became so successful that they saw it necessary to establish a second facility yet still maintaining their dedication to excellence in production.

INJEN TECHNOLOGY is not the kind of company that just sits back and rests on their laurels but they are constantly trying to find new ways to make their products more attractive to the aftermarket enthusiast like you For that reason in 2003 they developed their Super SES Stainless Steel Cat-Back Exhaust Systems that complemented their already existing air intake systems. They were certain to incorporate their signature style slanted mufflers in the new design and to give their customers that much sought after highly polished stainless steel design that you covet.

Now INJEN is not one to stand back while the others pass them up so in 2005 they developed the SP Air Intake System that was equipped with MR Technology thus introducing the World’s First Tuned Air Intake Systems and then they went on to offer you the all new Power Box, another innovation for the Truck, SUV and High Performance Autos.

The most recent innovative product line was introduced by INJEN three years later, the Diesel Power-Flow, the premier design that joined the first Power-On-Demand air intake system with VI Technology and an incomparable removable stainless steel pre-filter.

Audi

These are some of the items you can find at LMPerformance for your Audi

Progress through Technology- is the company ethos and is the core belief that drives the development of every Audi vehicle and if you are the proud owner of an Audi you deserve the best for your vehicle and Late Model Performance wants to help you get what you deserve.

LMPerformance is proud to offer high quality exhaust systems for your Audi by B&B (Billy Boat) Exhausts. B&B Systems feature an exotic sound that is never too loud. B&B Exhausts are made in the USA and are constructed of high Quality 304 Stainless Steel.

The Sport Lowering Springs from B & G Suspension for your Audi 200, 4000, 5000, 80. 90, A3, A4, A5, A6, A8, S4, S5, S6 and TT can give your Audi that race car look but as an added incentive to make the change consider the fact that they will promote better handling and road holding because you are reducing the distance between your car and the floor and as a consequence are altering the air flow under the car. The B&G springs are manufactured to the high standards you want in lowering springs so that they are long lasting and corrosion resistant.

Washable and reusable filters from the inimitable K & N can be beneficial in increasing horsepower in your Audi but consider that with the addition of an air intake system you can eliminate air restrictions built into your factory system for even greater results. The 57 series air intake systems for your A3, Quattro and TT will produce a marked improvement in your engine’s performance and you won’t be disappointed in your decision to make this change. The K&N Performance Kit for your A3, A4, Quattro and TT; the International Kit for the A3, A4, A6, RS4, TT, A6, A3 all have an oversized air filter and are attached to rotationally molded tubes of High Density Polyethylene g for precise shaping so that there is a resultant reduction in turbulence and freer path for air flow into your Audi engine.

Replacing your clutch either out of necessity, improvement or just racing fun will be worth the investment with an outstanding clutch from SPEC. The SPEC products are available as full Clutch Kits, Clutch Disks and Clutch Pressure Plates for your Audi and because SPEC knows not all drivers are alike they offer you a multiplicity of choices for your new clutch so that you can match your clutch to your driving needs rather than matching your driving to your clutch’s needs. Also for the discriminating buyer we have the SPEC billet flywheels, manufactured to the highest standards with a .001 machine tolerance for a perfect seating surface on your Audi clutch for those who need a lighter weight flywheel for their driving demands.

For even more improved performance replace your OEM shocks with the premier high performance shocks from KONI. The KONI shocks and shock and spring kits and are obtainable in the yellow sport that can be used with spring kits, the orange street, and the FSD Gold that adjust automatically to road conditions. KONI Coil Over Kits for your Audi TT, A3 and A4 are an enhancement to your Audi because they produce better road holding and a captivating look and the give you the ability to individualize your ride height. KONI is known worldwide for the manufacture of performance and adjustable shocks that are of superlative quality.

Installing the EIBACH Sway Bar Kit to your Audi A3 will fine-tune the performance handling of your car, reduce body roll and result in improved corner gripping and since it is manufactured by the prestigious EIBACH company you get a million-mile warranty because they believe in their product. Or, better yet, consider the Sport-Plus for your Audi A3 that includes the EIBACH SPORTLINE Springs and Anti-Roll Kit Sway Bars so that you reduce squat during acceleration, body roll and excessive nose-dive. Consider Coil-Over Kits for your A3, A4, S4 and TT to get your Audi looking and performing its best or install lowering kits on your A3, A4, A5, A6, S4, S5 and TT to lower your car's center of gravity resulting in high performance and an extremely low and comfortable ride- all from the prestigious manufacturer EIBACH.

Whether out of necessity because of repair, for improvement in appearance, or for aerodynamics in racing, choosing body parts can be overwhelming.

but with extraordinary manufacturers like Seibon and Duraflex the job is easy. Seibon Carbon components are made of high-quality carbon fiber and whether it be trunk panels for your A4 and A8, Hoods for your A3, A4, A5, A8 or TT, or Rear Wings for your TT you will get the best with Seibon because every part has an exceptional carbon/resin ration for extra strength and comes with a glossy clear coat. The eminent manufacturer Duraflex can indulge your Audi with Body Kits, Bumpers, Rear Lips, Front Spoilers, Door Caps, Fender Flares, Grilles, Hoods, Rear Wings, Side Scoops, Side Skirts and Trunk Panels fabricated from its extraordinary composite of fiberglass, plastic and resins that present you with a product that is eminently more durable at an affordable price and ready for a paint job because they come primed.

^

LM Performance Shopper Approved Reviews