The Driveshaft Shop RA5424X5-RA5425X5: Camaro 2010-14 1400 HP Level 5 Direct Bolt-In Axles (Set)


The Driveshaft Shop RA5424X5-RA5425X5 - The Driveshaft Shop Camaro 2010-14 1400 HP Level 5 Direct Bolt-In Axles Set.

The Driveshaft Shops 1400hp axles from LMPerformance feature:

  • Full 30 spline certified 300M center bars (not just 28 spline like a factory 108mm CV would use) 30 spline like the Viper T56 and any upgraded T56 its the reason we do too. If the cages are stronger the bars need to be also (same center bar used in Lingenfelter's 6-speed car)
  • Certified 4340AQ cages REM polished with a re-designed radius on the cage window, cages are full 4340 not the standard material that have been carbonized and made brittle.
  • Center race in the CV is certified 300M, this should need no explanation, no one else uses this and we can prove it.....
  • CNC Rolled splines. Most know a forging is always stronger than billet. Here at The Driveshaft shop we roll our axle splines, this is by far the strongest way to form a spline and is far superior to "old technology" cut splines. by rolling a spline you are taking the material that was already there and re-forming it (forging). by cutting a spline you are removing material and the inherent grain structure that its made with. Don't take our word for this, please search the internet and see what spline is better. If your looking for the strongest axle you have arrived at the right place.

Product Summary

The Driveshaft Shop RA5424X5-RA5425X5: Axles \ CV Joint for Chevrolet Camaro 2010-2014
The Driveshaft Shop
Manufactured by: The Driveshaft Shop
Model: RA5424X5-RA5425X5
Product ID: 659622
Price: $1,599.99
Condition: New

About The Driveshaft Shop

History and information about The Driveshaft Shop and their products.

The Driveshaft Shop has been designing driveshafts used in racecars and street performance cars for over 30 years. Driveshafts can be ordered in carbon fiber, Aluminum and Chromoly. LMPerformance carries all of The Driveshafts products including driveshafts, half shafts, Axles, input shafts and more.

There is something special about THE DRIVE SHAFT SHOP that LMPERFORMANCE wants you to know and that is that they dynamically balance each and every drive shaft at over 9000 RPMs for unsurpassable dependability and we want to let you know why that is so important. Most balancing machines depend on sensors that determine the “weight centerline” of the spun part and this then gives the information that is needed to determine how much weight is then necessary to bring it with the required tolerance. However, if the shaft can be spun at the actual speed it will be used at it can provide significantly more information affording the opportunity to make a much more precise correction, and an additional significant advantage is that THE DRIVE SHAFT SHOP’s high speed balancer can analyze parameters such as joint tolerance, tube flex, harmonic resonance, slip yoke instability and more, all extremely important and helpful in making the drive shaft as precise as possible. The majority of balancing machines only spin anywhere from four hundred to three thousand RPM but this new balancer that THE DRIVE SHAFT SHOP had custom made to assure primo quality is exceptional because of its ability to dynamically balance at over nine thousand RPM’s. Now let’s talk about the differential and we are sure all you racing aficionados know this but some of you enthusiasts new to racing my want a little help. When your car corners the inner wheel travels a shorter distance than the other wheel and if your car did not have a differential the result would be either an inner wheel that rotates much too fast or the outer wheel would drag and that is certainly not something you want because then your car would be extremely difficult to handle, and you would experience tire damage or possible drive train failure. So you can see why you need a differential that is made by a company you can trust and from what we have indicated above you hopefully will feel confident you can trust THE DRIVE SHAFT SHOP to provide you with a quality product. But what if you are in the performance arena and don’t want cornering difficulties such as the inside wheel spinning while hard on the gas in your powerful Corvette, Charger or 300C then you need a limited differential and you will find a sui generis one by THE DRIVE SHAFT SHOP on the LMPERFORMANCE web site that is of inimitable quality, and because it allows for a limited amount of clutch slip between each axle side you will experience relatively small differences in rotation when you take that corner and will prevent the unwelcome and dangerous wheel spin. Previews all of the nonpareil transmission products by THE DRIVE SHAFT SHOP including the above mention products, axles, and a potpourri of other parts on the LMPERFORMANCE web site and let us help you get your drive shaft in perfect working order at a competitive price and with free shipping.

The Driveshaft Shop RA5424X5-RA5425X5 Axles \ CV Joint Review(s)

Reviews for The Driveshaft Shop RA5424X5-RA5425X5 (the item on this page) are show below.

Total Reviews for this product: 0

(Be the first to comment about this product)

Other Popular Parts

Below are other popular parts other customers have purchased for their Chevrolet Camaro.

* Shipping Notes: Please note FREE Shipping refers to shipping within the contiguous continental US. All other locations extra. If your order will be delayed, you will be notified via email the estimated shipping date.