(actual products may differ)
Click to View Larger Image(s)
Get 6 months financing on orders of $99 or more when you pay with Bill Me Later through PayPal at our Checkout Page.
Reposition your instant center by changing your lower control arm angle for improved traction. Brackets lower the rear of the control arm up to 3, a must for all lowered vehicles to correct lost suspension geometry. By lowering your vehicle, you are changing the lower control arm angle allowing the rear mounting point to sit higher than the front. This will, in return, cause wheel hop and a great deal of traction loss.
Lowered Vehicles: We do not recommend lowering a 3rd or 4th generation F-Body without lower control arm relocation brackets due to the compromise in the geometry on the instant center. Brackets will significantly improve instant center position, eliminate wheel hop and increase traction. Brackets installed will also help 60-foot times of .10 or better, lower ETs and increase track consistency--a must for all lowered vehicles!
Non-Lowered Vehicles: Product installed on a stock height vehicle will also see a great increase in traction by lowering the rearward angle of the lower control arm, allowing more force to be placed on the rear tires. Relocation brackets have two settings to allow the lower control arm to be lowered either 2 or 3, depending on your preference. Settings are placed in a correct pattern that will allow use of all OEM control arms or any aftermarket control arm (brackets do not require a longer control arm.) Brackets installed on a non-lowered F-Body provide a .10 or better 60-foot; reduction and an increase in track consistency.
Installation:Brackets are Weld-in only and install in approximately 1 - 1½ hours. All hardware and installation instructions are included with each kit.
* Shipping Notes: Please note FREE Shipping refers to shipping within the contiguous contential US. All other locations extra. If your order will be delayed you will be notified via email the estimated shipping date.
Total Reviews for this product: 0
(Be the first to comment about this product)
Talk about stiffening up the car. Day/night difference in ride and handling. The strut tower bar and tunnel brace helped, but the 3-point sub-frame connectors really stopped all the "wiggling" associated with my Camaro convertible. Instead of the car flexing over ripples in the road, the suspension is soaking up the bumps. Car ride firm, but not punishing. Highly recommended.
UMI 3-point sub-frame connector, Spohn tunnel brace, spohn strut tower bar
UMI Rear Lift Bars 1979 - 1998 Ford Mustang
I really like these lift bars . wasn't hard at all to put in by myseft didn't take very long either 1 hour or so. If you are looking for some good lift bars at a good price , these are what you are looking for . They work really GOOD !!
well.. trick flow street heat intake ,C&L 76 mm Mass Air , bbk cold air ,bbk 70mm TB and egr , 24lbs injet ,trick flow TW 205 cnc ported heads ,E 303 cam , SCT chip , bbk 1 5/8 full length Silver Ceramic Coated ,flow m 40's , Steeda Tri-Ax shifter ,Upgraded Super-Duty T-5 Transmission ,3.73 gears ,Pro-Street Series Chrome-Moly Double Adjustable Upper Control Arms , UMI Rear Lift Bars ,Eibach Pro-Kit Springs,BBK 255LPH Fuel Pump. thats enough for now.
UMI Full Length Subframe Connectors - Weld-In 1979 - 1993 Ford Mustang (non-convertible)
I used these on my 1991 Notchback. I also used the torque box reinforcements and battle boxes. These fit so incredibly well, the subframes hug the contours of the vehicle. Incredibly beautiful for what they are, well that and my installation, see on my site, the completed install: http://www.thatmetalbox.com/Automotive/1991MustangWeldComplete/index.html and earlier work on the install http://www.thatmetalbox.com/automotive/1991MustangBlanchWeld/
Subframe connectors, Battle Boxes, Torque Box reinforcements, 4:11 gears, Lentech
See More Reviews on UMI Performance Parts
Flowmaster American Thunder Exhaust System 1995-97 Camaro 3.8L V6
Magnaflow Catback 3.5 inch slash tip Camaro 1993-1997 V6 V6
K&N High Performance Oil Filter Camaro 1982-02 V6
Magnaflow Exhaust System for Camaro V6 1993-1997 V6
UMI 1993-02 Camaro Boxed Style Weld-In Subframe Connectors (non-convertible) V6
UMI 1993-02 Camaro Tubular Subframe Connectors - Bolt-In (non-convertible) V6