Click to View Larger Image(s)
Get 6 months financing on orders of $99 or more when you pay with Bill Me Later through PayPal at our Checkout Page.
The high quality, two-piece, teflon lined spherical rod ends provide for bind-free handling performance. The poly bushed ends are mounted onto the chassis (floor) mount to absorb road noise. These combo ended LCAs will still wipe out most bind, yet keep the noise level bearable on a street driven car.
1.25 x .095 wall mild steel tubing
3/4 chrome-moly spherical two piece teflon lined rod ends
Polyurethane bushed ends equipped with grease fittings for easy lubrication
Right hand and left hand threaded ends allow for on-car adjustment
Easy on-car adjustments
Re-uses OEM mounting hardware, no need to drill out your car's LCA mounting bracket holes
Available powder coated your choice of bright red or gloss black
Adjustable Spherical Rod Ended/Poly Bushed Lower Control Arms
NEW: By request of our customers we are now using the highest quality spherical rod ends available. All of our spherical rod ended components now come equipped with QA1 extra high strength, chrome moly rod ends with Teflon®/Kevlar® self lubricating race. When shopping around for spherical rod ended components, do not shop on price alone. The lower grade rod ends (which are much cheaper) will not hold their tolerances like the premium QA1 rod ends we utilize, this will cause substantial amounts of noise in a short time. We have had to increase our prices, but it is money very well spent in the long run, these rod ends will last a very long time. The rod ends supplied on our components are QA1 ENDURA 2000 Series (XMR12).
* Shipping Notes: Please note FREE Shipping refers to shipping within the contiguous contential US. All other locations extra. If your order will be delayed you will be notified via email the estimated shipping date.
Spohn Adj Pan-Bar CM Rod End/Poly Bushing (4130 Chrome Moly) - 1982-02 Camaro V8 / V6
Our Price $169.00
SPOHN Adjustable Tubular Shock Tower Brace 1993-02 Camaro V8
Our Price $129.00
Spohn Tubular Sub-Frame Connectors - 1993-02 Camaro V8
Our Price $149.00
MSD Superconductor 8.5mm Plug Wires for LS1 Camaro 1998-02 V8
Our Price $84.95
BMR Xtreme Shocktower Brace 1993-2002 V8 all Camaro
Our Price $179.95
Spohn Sway Bars 32mm/ 22mm Solid 4140 Chrome Moly 1993-02 Camaro V8 / V6
Our Price $349.00
Total Reviews for this product: 0
(Be the first to comment about this product)
The stock tunnel brace on my Camaro was a joke. Was just a thin piece of stamped steel you can actually bend with your hand. The Spohn tunnel brace really stiffened up the chassis by itself and stopped the majority of "wiggles" associated with convertibles (before I installed the sub-frame connectors which ended all "wiggles"). I recommend this product.
UMI 3-point sub-frame connector (convertible), Spohn tunnel brace, Spohn strut tower bar
Spohn Adj. Torque Arm - Trans. Mounted 1993-02 Camaro V8
This torque arm is far better then the stock arm. I had to replace the stock because it cracked and bent. When getting this spohn arm you can clearly tell why it's so much better then the stock one. Even if your car is stock its far to dangerous to run with the factory torque arm. In fact I'd say its life threatening. Oh! and I did notice an improvement in cornering.
magnaflow catback exhaust, pacesetter LT headers with y-pipe, slp cold intake, spohn adj torque arm
Spohn Adj Torque Arm Poly Bushing Mount TH400 Trans. Retrofit (short tail) 1982-92 Camaro V8
I really love how easy this x-member went in and bolted to the car. The adj t/a makes pre-load a snap. The whole set up just looks sexy sittin' under there in black. The only thing I might change is the fact that there is no way to get a socket on the bolts for the trans mount to bolt it to the tailshaft, a challenge to get a wrench on it. The access holes have to be drilled out big enough to get a socket on them. Please let me know if there is a different way. I will definitely be buying more Spohn products for this dirty bird. Sub frame connectors are next. Need a good sized decal to put on the car also. (Wink Wink)
496 Hp/542lb-ft 383, Wilsons Transmissions TH400 w/ rev valve body, killer shift kit (snap ur head off & put in the back seat w/a smile u cant chissel off) & a Wilson's 10" 3500 stall. MSD Digital 6+ box. Spohn trans mount w/adj t/a. Heddman full tube headers, 3" pipe to Super 44's dumped @ the rear floor pan. '88 IROC rear end w/ disc brakes, True-Trac Posi, Richmond 4.10's. Six point cage.
See More Reviews on Spohn Performance Parts
Flowmaster American Thunder Exhaust System 1995-97 Camaro 3.8L V6
Magnaflow Catback 3.5 inch slash tip Camaro 1993-1997 V6 V6
K&N High Performance Oil Filter Camaro 1982-02 V6
Magnaflow Exhaust System for Camaro V6 1993-1997 V6
UMI 1993-02 Camaro Boxed Style Weld-In Subframe Connectors (non-convertible) V6
UMI 1993-02 Camaro Tubular Subframe Connectors - Bolt-In (non-convertible) V6